An official State of Ohio site. Here’s how you know
Live Chat
Contact

Maintenance Electrician Job in Mentor, Ohio US

Maintenance Electrician

OhioMeansJobs Lake County - Mentor, OH

Posted: 4/13/2026 - Expires: 5/29/2026

Job ID: 293345479

Print 

Job Description

OhioMeansJobs | Lake County is accepting resumes for the following position:


Position: Maintenance Electrician

Location: Mentor, OH

Hours: Full Time

Pay: $36.98/Hr

Position ID: 38131426


POSITION SUMMARY

Under limited supervision, is responsible for general electrical maintenance, troubleshooting, installation and repair of low and high voltage systems.


KEY RESPONSIBILITIES

  • Must complete all work in a safe and proficient manner
  • Fill out inspection sheets, timecards, work orders and other reports properly.
  • Must be able to read and utilize schematics
  • Must be able to utilize computers and CMMS systems to complete task
  • Must be able to communicate with internal and external personnel to troubleshoot and repair systems
  • Must property issue and restock components from storeroom
  • Must be able to communicate required material to perform work assigned
  • Capable of assisting in the training of apprentices or employees of lesser skills
  • Assist mechanics in equipment repairs as directed
  • May do greasing, cleaning and inspecting of stationary equipment
  • Must be able to train other employees in safe job procedures of electrician
  • Must maintain a clean and hazard free work place at all times
  • Performs troubleshooting, repairs, and PM techniques on low to high voltage equipment.
  • Operates service hoist system in automatic and manual
  • Capable of performing electrical repairs in shaft ways
  • Performs other related work as assigned
  • Works in an underground mine where temperatures in the work areas range from 78° – 100°F. The relative humidity is high in summer and low in winter.
  • Works on the surface of the mine where conditions are related to weather outdoors, with varying range in temperature and humidity. Environment has a fair amount of noise and dust.
  • Work areas are generally dry.
  • Lighting is provided in key areas; however, most areas are illuminated only by a miner’s cap lamp and/or by equipment lighting.
  • Floor heave is prevalent and may result in uneven floor conditions. Floors may also be polished by mobile equipment traffic resulting in slippery footing.
  • Some work must be done around machinery and equipment that is in motion as well as around energized power cables.
  • As with all work underground, this position requires attention be paid to roof and rib conditions.
  • Must be able to stand for long periods of time while operating machine.
  • Must be able to walk for long distances over terrain varying from soft to hard as well as slick and uneven.
  • Must be able to sit in operators’ seat for long periods of time while operating the machine and being subject to whole body vibrations.
  • Must be able to work from heights and wear/utilize a full body harness to perform work as necessary
  • Must be able to use a shovel to clean up spillage and lift 5 feet
  • Must be able to operate various machinery by manipulating multiple hand and foot control levers, sometimes simultaneously.
  • Must be capable of lifting 65lb
  • Must be able to ascend and descend a ladder of at least thirty (30) feet in length.
  • Must be familiar with the Lock Out/Tag Out Policy and Procedures.
  • Requires thorough knowledge of heavy industrial/ mining electrical maintenance practices
  • Proficient in troubleshooting 3 phase 4160V motor control center troubleshooting, maintenance and repair.
  • Proficient in 480V 3-phase and 4160V 3-phase mine power feeder circuits with ground monitors
  • Proficiency of reading schematics, calculating wire size and motor horsepower requirements for new installations.
  • Able to use schematics and ladder logic to troubleshoot PLCs, soft starts, and other types of motor control circuits. Must be familiar with the safe operation of required equipment.
  • Is required to operate and be alert to any conditions which could pose a safety hazard or result in injury or equipment breakdown or damage, and to report or correct such conditions immediately.
  • Must be able to read and understand verbal and written instructions.
  • Some computer skills needed (CAT ET, Windows, SMAG, etc.)


QUALIFICATIONS

  • E.D. or high school diploma
  • Minimum 2 years of industrial electrical experience.
  • MSHA certified electrician, preferred
  • 2 years of mining electrical experience, preferred


APPLY TODAY!

Email: lake_omj_inquiry@jfs.ohio.gov

Phone: 440-350-4323


Job Summary

Employment Type:
Full Time Employee
Job type:
Regular Employment
Skill Based Partner:
No
Education Level:
Attained Certificate of equivalency for a HS degree
Work Days:
Mon, Tue, Wed, Thu, Fri
Job Reference Code
N/A
Salary
$36.98 - $0.00 /hour
Licenses / Certifications:
N/A
Display Recommended WorkKeys®Recommended WorkKeys®:
Applied Math: 4
Graphic Literacy: 4

Workplace Documentation: 4