An official State of Ohio site. Here’s how you know
Live Chat
Contact

Welcome,
New User

Mechanical Door Repairers

Install, service, or repair automatic door mechanisms and hydraulic doors. Includes garage door mechanics.

View All

    Work Activities

    Work Activities

    • Bore or cut holes in flooring as required for installation, using hand or power tools.
    • Collect payment upon job completion.
    • Repair or replace worn or broken door parts, using hand tools.
    • Cut door stops or angle irons to fit openings.
    • Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
    • Wind large springs with upward motion of arm.
    • Fasten angle iron back-hangers to ceilings and tracks, using fasteners or welding equipment.
    • Adjust doors to open or close with the correct amount of effort, or make simple adjustments to electric openers.
    • Repair or replace worn or broken door parts, using hand tools.
    • Lubricate door closer oil chambers, and pack spindles with leather washers.
    • Inspect job sites, assessing headroom, side room, or other conditions to determine appropriateness of door for a given location.
    • Remove or disassemble defective automatic mechanical door closers, using hand tools.
    • Set in and secure floor treadles for door-activating mechanisms, and connect power packs and electrical panelboards to treadles.
    • Carry springs to tops of doors, using ladders or scaffolding, and attach springs to tracks to install spring systems.
    • Run low voltage wiring on ceiling surfaces, using insulated staples.
    • Clean door closer parts, using caustic soda, rotary brushes, or grinding wheels.
    • Assemble and fasten tracks to structures or bucks, using impact wrenches or welding equipment.
    • Study blueprints and schematic diagrams to determine appropriate methods of installing or repairing automated door openers.
    • Complete required paperwork, such as work orders, according to services performed or required.
    • Remove or disassemble defective automatic mechanical door closers, using hand tools.
    • Fabricate replacements for worn or broken parts, using welders, lathes, drill presses, or shaping or milling machines.
    • Order replacement springs, sections, or slats.
    • Install dock seals, bumpers, or shelters.
    • Install door frames, rails, steel rolling curtains, electronic-eye mechanisms, or electric door openers and closers, using power tools, hand tools, and electronic test equipment.
    • Operate lifts, winches, or chain falls to move heavy curtain doors.
    • Prepare doors for hardware installation, such as drilling holes to install locks.
    • Set doors into place or stack hardware sections into openings after rail or track installation.
    • Cover treadles with carpeting or other floor covering materials, and test systems by operating treadles.

    Skills

    • Speaking

      Talking to others.

    • Writing

      Writing things for co-workers or customers.

    • Instructing

      Teaching people how to do something.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Social Perceptiveness

      Understanding people's reactions.

    • Service Orientation

      Looking for ways to help people.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Repairing

      Repairing machines or systems using the right tools.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Negotiation

      Bringing people together to solve differences.

    • Management of Material Resources

      Managing equipment and materials.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Time Management

      Managing your time and the time of other people.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Operation and Control

      Using equipment or systems.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Reading Comprehension

      Reading work-related information.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Science

      Using scientific rules and strategies to solve problems.

    • Mathematics

      Using math to solve problems.

    • Programming

      Writing computer programs.

    • Technology Design

      Making equipment and technology useful for customers.

    • Coordination

      Changing what is done based on other people's actions.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Far Vision

      Seeing details that are far away.

    • Time Sharing

      Doing two or more things at the same time.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Trunk Strength

      Using your lower back and stomach.

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Speech Clarity

      Speaking clearly.

    • Deductive Reasoning

      Using rules to solve problems.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Category Flexibility

      Grouping things in different ways.

    • Selective Attention

      Paying attention to something without being distracted.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Written Expression

      Communicating by writing.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Problem Sensitivity

      Noticing when problems happen.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Oral Comprehension

      Listening and understanding what people say.

    • Night Vision

      Seeing at night or under low light.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Spatial Orientation

      Knowing where things are around you.

    • Information Ordering

      Ordering or arranging things.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Written Comprehension

      Reading and understanding what is written.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Oral Expression

      Communicating by speaking.

    • Originality

      Creating new and original ideas.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Speech Recognition

      Recognizing spoken words.

    • Near Vision

      Seeing details up close.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    Knowledge

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, rules of composition, and grammar.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    Career Video

    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 55480/yr
    • Typical Salary
    • Ohio Hourly Wage 26.67/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 1,330
    • Yearly Projected Openings 110

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Dependability
    • Attention to Detail
    • Cooperation
    • Independence
    • Integrity
    • Initiative

    Tools

    • Adjustable wrenches
    • Bench grinder
    • Cleaning scrapers
    • Cold chisels
    • Crimping pliers
    • Flat hand file
    • Forklifts
    • Hacksaw
    • Hammers
    • Hand trucks or accessories
    • Hoists
    • Impact wrenches
    • Jigsaw
    • Ladders
    • Levels
    • Locking pliers
    • Manlift or personnel lift
    • Minivans or vans
    • Multimeters
    • Nibblers
    • Oscilloscopes
    • Personal computers
    • Planes
    • Power drills
    • Power routers
    • Power sanders
    • Power saws
    • Pullers
    • Punches or nail sets or drifts
    • Saws
    • Screwdrivers
    • Shielded metal arc welding or stick welding machine
    • Sockets
    • Soldering iron
    • Tablet computers
    • Wire and cable pulling device
    • Wire or cable cutter
    • Wire-stripping pliers
    • Wood gouge

    Technology

    • Data base user interface and query software
    • Electronic mail software
    • Internet browser software
    • Office suite software
    • Operating system software
    • Presentation software
    • Route navigation software
    • Spreadsheet software
    • Web page creation and editing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: