Live Chat
Contact

Avionics Integration Engineer, Senior (F-15 Electronic Warfare) Job in Dayton, Ohio US

Avionics Integration Engineer, Senior (F-15 Electronic Warfare)

Oasis Systems, Inc. - Dayton, OH

Posted: 4/17/2021 - Expires: 7/16/2021

Job ID: 226360067

Print 

Job Description

Avionics Integration Engineer, Senior (F-15 Electronic Warfare)



Job Locations

US-OH-Dayton / Wright-Patterson AFB





Requisition Number


2021-10460



Category


Professional Services



Overview





Oasis Systems has an exciting opportunity for a Avionics Integration Engineer, Senior (FMS Japan, Electronic Warfare)located at WPAFB, OH to support the F-15 Japan program.The Avionics Integration Engineer will apply a full range of acquisition program management philosophy, policies, and procedures, to perform a wide range of acquisition management activities in support of the existing and future F-15 Division aircraft programs. The F-15 Division is responsible for management and professional services, engineering and technical services, and studies, analyses and evaluations to accomplish the unit's mission to design, develop, integrate, test, produce, deploy, modernize, sustain and support U.S. and FMS F-15 fighter aircraft weapon systems and subsystems.

LOCATION: WPAFB, OH

JOB STATUS:Fulltime

TRAVEL:Occasional CONUS travel may be required

REQUIRED QUALIFICATIONS (Education, Certifications, Experience, Skills)

SECURITY CLEARANCE:DoD Secret clearance required

EDUCATION:Functionally Aligned Minimum Recommended Education and Experience:

Minimum of ten (10) years of experience and a MS in engineering or a minimum of twenty (20) years of experience and an ABET-accredited bachelor's degree in engineering. Works high-visibility or mission critical aspects of a given program and performs all functional duties independently. Oversees the efforts of less senior staff and/or is responsible for the efforts of all staff assigned to a specific job.

CERTIFICATIONS: No certifications required

EXPERIENCE LEVEL: Senior

Possesses the advanced knowledge, experience and recognized ability to be considered an expert in their technical/professional field, possess the ability to perform tasks and oversee the efforts of junior and journeyman personnel within the technical/professional discipline. Will demonstrate advanced knowledge of their technical/professional discipline as well as possess a comprehensive understanding and ability to apply associated standards, procedures and practices in their area of expertise (Program Office, Enterprise and Staff Level Support interface).

QUALIFICATIONS/SKILLS:

The Contractor shall have knowledge of avionics engineering in support of avionics subsystem definition, development, integration, all verification methods to include review of ICD, sustainment, Modeling, Simulation and Analysis (MS&A), T&E, and airworthiness certification across a wide range of hardware and software systems.
The Contractor shall have knowledge of radar theory and principles, and an understanding of the radar design, development, and implementation process is required. Expected activities include providing technical advice and serving as the technical interface between the Government customers and the radar manufacturers, interacting with customers, participating in meetings, and producing technical detailed products.

RESPONSIBILITIES:

The Contractor shall serve as an avionics engineer with particular emphasis in integration of radar and EW sensors.
The Contractor shall develop/review/update applicable program documentation for avionics engineering relevant requirements. The Contractor shall assist the Government in drafting and developing systems/subsystem specifications and various engineering documents in support of milestone reviews and events.
The Contractor shall be responsible for development and test of the program system hardware and software and its integration into the program system architecture. The Contractor shall attend all technical reviews and provide technical advice on the path forward to installation of the new hardware and software into the system. The Contractor shall review system specific test plans and participate in the conduct of system, subsystem, and component testing.
The Contractor shall support and conduct performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
The Contractor shall support hardware/software development and related system ground and flight test activities including, but not limited to, hardware-in-the-loop, subsystem integration labs, developmental T&E, and initial operational T&E related activities.
The Contractor shall support and conduct systems analyses to include, but not limited to, avionics system design/design feasibility and state-of-the-art assessment requirements, system capacity analysis, investigate alternative solutions and architecture trade-offs, support operations concept development and document results.
The Contractor shall perform analyses of avionics and subsystems including, but not limited to, system threat analysis, laser systems, computer systems, avionics interfaces, and multiplex data bus communications. The Contractor shall also identify potential issues and/or areas of improvement for Government consideration.
The Contractor shall accomplish data processing including centroiding, tracker, timing issues, data loading issues, software; interfaces to combat system and/or automation systems including required data, quantity of data, data merging and integration.
The Contractor shall accomplish MS&A of radar, targets, and clutter/weather; testing and evaluation of radar system performance including developing test plans and procedures, witnessing tests, and writing test reports for qualification testing, operational field testing, and factory system-level testing.
The Contractor shall support Aircraft Information Management Systems (AIMS) requirements/testing/certification and spectrum management requirements/testing/certification.
The Contractor shall use knowledge of Communication Navigation Surveillance/ Air Traffic Management (CNS/ATM) requirements, policies, and regulations to define requirements, complete CNS/ATM compliance matrices, and support testing and certification of aircraft and supporting systems.
The Contractor shall perform technical activities associated with radar waveforms and signal and data processing techniques that provide robust performance in Electro-Magnetic Interference (EMI), Electronic Counter-Measure (ECM), multipath, ducting, and clutter environments. These activities may include, but not limited to, phased array and active aperture antennas, adaptive array processing, digital beam forming, klystron and solid state transmitter technologies, receiver and transmitters stability issues, advanced Analog-to-Digital (A/D)
technology, EMI, ECM, and EW. Digital signal processing including Moving Target Indication (MTI), pulse Doppler, monopulse, imaging, and adaptive techniques, Constant False Alarm Rates (CFARs), clutter maps, and timing issues.
The Contractor shall apply an understanding of aeronautical vehicle systems, software, and/or airborne or related ground systems avionics capabilities to support the core engineering tasks as they relate to EW engineering.

Who We Are

Oasis Systems is a premier provider of customer-driven, cost-effective and quality Engineering Services; Enterprise Systems and Applications; Human Factors Engineering; Information Technology and Cyber Security; Professional Services; and Specialized Engineering Solutions to the Department of Defense, FAA, NRC and other federal agencies.

We strive to be an exciting and welcoming company that attracts, develops, motivates and retains the most talented, skilled and dedicated people in the industry; where they are encouraged to achieve personal excellence, purpose, and their full potential and career aspirations; while supporting mission-critical national security technologies and programs.

Oasis Systems is an equal opportunity employer and does not discriminate in hiring or employment on the basis of any legally protected characteristic including, but not limited to, race, color, religion, national origin, marital status, gender, sexual orientation, ancestry, age, medical condition, military veteran status or on the basis of physical handicap which, with reasonable accommodation, render the application to satisfactorily perform the job available.

Identified Skills


Job Summary

Employment Type:
Full Time Employee
Job type:
Federal Contractor
Skill Based Partner:
No
Education Level:
Bachelor's degree
Work Days:
Mon, Tue, Wed, Thu, Fri
Job Reference Code
49102842_1
Salary
N/A
Licenses / Certifications:
N/A
Display Recommended WorkKeys®Recommended WorkKeys®:
N/A