Avionics Engineer, Senior
US-OH-Dayton / Wright-Patterson AFB
Oasis Systems has an exciting opportunity for a Avionics Engineer, Senior located Wright Patterson AFB, OH. The Avionics Engineer will provide support to the F-15 Division.
The F-15 Division is responsible for management and professional services, engineering and technical services, and studies, analyses and evaluations to accomplish the unit's mission to design, develop, integrate, test, produce, deploy, modernize, sustain and support U.S. and FMS F-15 fighter aircraft weapon systems and subsystems.
LOCATION: Dayton, OH
JOB STATUS: Full-time
TRAVEL: See below "Travel"
REQUIRED QUALIFICATIONS (Education, Certifications, Experience, Skills)
SECURITY CLEARANCE: Must possess an active DoD Secret Clearance
A minimum of 10 years of experience and a MS in engineering or a minimum of 20 years of experience and an ABET-accredited bachelor's degree in engineering
EXPERIENCE LEVEL: Senior
Possesses the advanced knowledge, experience and recognized ability to be considered an expert in their technical/professional field, possess the ability to perform tasks and oversee the efforts of junior and journeyman personnel within the technical/professional discipline. Will demonstrate advanced knowledge of their technical/professional discipline as well as possess a comprehensive understanding and ability to apply associated standards, procedures and practices in their area of expertise (Program Office, Enterprise and Staff Level Support interface).
Must be proficient in the use of Microsoft Office Applications (Outlook, Word, Excel, PowerPoint and Access), Microsoft Internet Explorer, and other standard (Customer specified) applications.)
Must be able to transport self to various facility sites, as required. If using own motor vehicle, must possess a valid driver's license and proof of insurance
May require lifting up to 25 pounds.
Requires visual acuity to use a keyboard.
Avionics Integration Engineering - USAF or FMS
The Contractor shall have knowledge of avionics engineering in support of avionics subsystem definition, development, integration, all verification methods to include review of ICD, sustainment, Modeling, Simulation and Analysis (MS&A), T&E, and airworthiness certification across a wide range of hardware and software systems. The Contractor shall have knowledge of radar theory and principles, and an understanding of the radar design, development, and implementation process is required. Expected activities include providing technical advice and serving as the technical interface between the Government customers and the radar manufacturers, interacting with customers, participating in meetings, and producing technical detailed products.
In addition to the engineering tasks to include FMS-assigned engineers, the Contractor shall perform the following tasks:
The Contractor shall serve as an avionics engineer with particular emphasis in integration of radar and EW sensors.
The Contractor shall develop/review/update applicable program documentation for avionics engineering relevant requirements. The Contractor shall assist the Government in drafting and developing systems/subsystem specifications and various engineering documents in support of milestone reviews and events.
The Contractor shall be responsible for development and test of the program system hardware and software and its integration into the program system architecture. The Contractor shall attend all technical reviews and provide technical advice on the path forward to installation of the new hardware and software into the system. The Contractor shall review system specific test plans and participate in the conduct of system, subsystem, and component testing.
The Contractor shall support and conduct performance effectiveness, cost effectiveness, cost performance, life-cycle cost, producibility, maintainability, supportability, reliability, technical and schedule risk assessments, and scheduling trade-off studies.
The Contractor shall support hardware/software development and related system ground and flight test activities including, but not limited to, hardware-in-the-loop, subsystem integration labs, developmental T&E, and initial operational T&E related activities.
The Contractor shall support and conduct systems analyses to include, but not limited to, avionics system design/design feasibility and state-of-the-art assessment requirements, system capacity analysis, investigate alternative solutions and architecture trade-offs, support operations concept development and document results.
The Contractor shall perform analyses of avionics and subsystems including, but not limited to, system threat analysis, laser systems, computer systems, avionics interfaces, and multiplex data bus communications. The Contractor shall also identify potential issues and/or areas of improvement for Government consideration.
The Contractor shall accomplish data processing including centroiding, tracker, timing issues, data loading issues, software; interfaces to combat system and/or automation systems including required data, quantity of data, data merging and integration.
The Contractor shall accomplish MS&A of radar, targets, and clutter/weather; testing and evaluation of radar system performance including developing test plans and procedures, witnessing tests, and writing test reports for qualification testing, operational field testing, and factory system-level testing.
The Contractor shall support Aircraft Information Management Systems (AIMS) requirements/testing/certification and spectrum management requirements/testing/certification.
The Contractor shall use knowledge of Communication Navigation Surveillance/ Air Traffic Management (CNS/ATM) requirements, policies, and regulations to define requirements, complete CNS/ATM compliance matrices, and support testing and certification of aircraft and supporting systems.
The Contractor shall perform technical activities associated with radar waveforms and signal and data processing techniques that provide robust performance in Electro-Magnetic Interference (EMI), Electronic Counter-Measure (ECM), multipath, ducting, and clutter environments. These activities may include, but not limited to, phased array and active aperture antennas, adaptive array processing, digital beam forming, klystron and solid state transmitter technologies, receiver and transmitters stability issues, advanced Analog-to-Digital (A/D)
technology, EMI, ECM, and EW. Digital signal processing including Moving Target Indication (MTI), pulse Doppler, monopulse, imaging, and adaptive techniques, Constant False Alarm Rates (CFARs), clutter maps, and timing issues.
The Contractor shall apply an understanding of aeronautical vehicle systems, software, and/or airborne or related ground systems avionics capabilities to support the core engineering tasks as they relate to EW engineering.
The Contractor shall have a general understanding of current DoD and AF-specific acquisition regulations, guidelines, and processes.
The Contractor shall support application of knowledge and experience in engineering principles, criteria, and procedures to USAF systems, subsystems, and equipment procurement activities, post-award project/program management tasks, and acquisition programs throughout their life cycles.
The Contractor shall apply an understanding of DoD, USAF and common engineering/scientific principles, processes and procedures to improve performance and sustainability of existing and future USAF and joint service weapon systems.
The Contractor shall have an understanding of applying MIL-HDBK-516B, Airworthiness Certification Criteria, to aircraft systems and subsystems.
The Contractor shall assist in translating user requirements into weapon system requirements, which will be used to design, develop, fabricate, test and evaluate weapon systems, subsystem and equipment for eventual fielding and deployment.
The Contractor shall assist with the development of requirements and technology needs into action plans and policies necessary to improve and retain world class manufacturing, operations, re-manufacturing and de-militarization/disposal of weapon system capabilities within USAF.
The Contractor shall perform technical/mission analyses of existing and future operational requirements, assist in developing system concepts and perform technological/trade-off assessments of proposed designs/modifications.
The Contractor shall provide rapid response engineering service and support as augmentation to organic resources through in-depth problem identification, impact assessment and development of corrective actions for critical supportability problems.
The Contractor shall support and conduct the system safety engineering program, including mishap risk assessments, evaluate contractor safety proposals and safety analyses, evaluate safety concerns of F-15 using and support commands and assist with resolution of high priority safety issues.
The Contractor shall assist in translating Headquarters Air Combat Command (HQ ACC) and other user requirements into system requirements, which will be used to design, develop, fabricate, test and evaluate systems, subsystems, and equipment for deployment.
The Contractor shall provide support to produce or review products that include the following: technical evaluations/plans; engineering studies, reports and analyses; and acquisition strategies/plans such as: ICD; ORD/CDD; CONOPS; CPD; System Requirements Document (SRD); System Specification; RFPs; System Engineering Plan (SEP); Test and Evaluation Master Plan (TEMP); program environment, safety, and occupational health evaluation; information support plan; Program Protection Plan (PPP); Technology Assessment/Control Plan (TA/CP); cybersecurity strategy (formally information assurance strategy); Security Classification Guide (SCG); Alternative Live Fire T&E Plan; Clinger-Cohen Act compliance; consideration of technology issues; DM strategy; chemical, biological, radiological, and nuclear survivability assessments; net-centric data strategy; spectrum supportability determination; technical data rights strategy; technology readiness assessment; manufacturing readiness assessment, and; other program/technical documents as required.
The Contractor shall develop and collect technical data and inputs for staff summary packages and executive briefings to support coordination and signature of all associated documents for milestone approvals.
The Contractor shall support project team meetings, working groups, and all technical reviews, upon request, including but not limited to: SRR, PDR, CDR, TRR, TCM, TIMs, FCA, PCA, PRR, PMR, and other meetings/working groups/reviews as applicable.
The Contractor shall analyze equipment and software deficiencies, make recommendations for equipment and software deficiency corrections, and develop, integrate, and test equipment and software deficiency solutions.
The Contractor shall assist the Government in the engineering evaluation of prime weapon system/subcontractor recommendations for operational and support issues such as: evaluations of ACSNs, ECPs, CCPs, Federal Aviation Administration bulletins, modification proposals, DMS, program risk, and related documents.
The Contractor shall support the development and evaluation of IMP/IMS and systems engineering detail schedule engineering cost estimates.
The Contractor shall perform, as required, an advisory role for program source selections on all engineering-related requirements.
The Contractor shall support the F-15 Division in the performance of disciplined engineering activities to assure Operational Safety, Suitability, and Effectiveness (OSS&E) for all products. The Contractor shall follow the Life Cycle Systems Engineering (LCSE) and OSS&E related AFIs and all lower level supplements and related documents including applicable Operating Instructions (OI).
The Contractor shall assist with establishing, implementing and adhering to LCSE processes to ensure OSS&E compliance is achieved and maintained.
The Contractor shall aid the USAF in reviewing and updating the OSS&E Baseline Document and shall support the USAF in the identification of OSS&E elements, progress reporting of OSS&E metrics, and interaction with other organizations to ensure continued OSS&E compliance.
The Contractor shall ascertain the implementation status of the SEP throughout program operations and notify the USAF of pertinent shortfalls or gaps for which corrective action may be needed.
The Contractor shall help support the Mechanical System Integrity (SI) Program, maintain and update the Critical Safety Item list, and monitor airworthiness certification for F-15 Division aircraft.
The Contractor shall participate in value stream mapping activities and Air Force Smart Operations for the 21st Century (AFSO21) Program Facilitation. The Contractor shall understand the AFSO21 initiative and shall be able to apply and facilitate performance improvement events and actions to ensure the use of best engineering practices.
The Contractor shall advise the F-15 Division on engineering determinations of acceptable substitutes when parts obsolescence occurs.
The Contractor shall apply an understanding of systems acquisition, system and sub-system level hardware and software integration, systems requirements analysis and allocation, computer systems architecture, and systems and subsystems T&E.
The Contractor shall have working knowledge of the ITAR and foreign disclosure processes. The Contractor shall have an understanding of the Congressional notification and RIP/RIS approval process and support the Government in working through these processes.
The Contractor shall understand and provide advice on USG policy and technical requirements for individual countries as it relates to the acquisition programs.
The Contractor shall provide FMS expertise for various FMS programs within the F-15 Division that are in varied DoD acquisition stages to include planning, execution, delivery, sustainment and program closure IAW DoD policies and guidelines.
The Contractor shall assist with the monitoring, reviewing, analyzing and coordinating security assistance issues concerning DoD and non-DoD agencies to ensure compliance with established policies, LOR, LOA, the Foreign Assistance Act, the AECA, ITAR, and other relevant legislation.
The Contractor shall assist with Pre-LOA (P&A) and LOA, SOO/SOW development/editing, and reviewing of proposals as assigned by the Government. The Contractor shall assist with reviews of various acquisition documents, export licenses, or other documentation submitted by the prime weapon system or original equipment manufacturers for Government review; and assist with release and coordination of Government responses.
The Contractor shall assist with the implementation and execution of assigned LOAs IAW the AECA, Security Assistance Management Manual, DSCA Manual 5105.38-M and complete assigned projects with no or minimal assistance.
The Contractor shall provide technical expertise and advice to SAPMs, line managers, and functional team members across all phases of the acquisition process and insight into areas relating to technical policy and lessons learned. The Contractor shall ensure requirements are identified to provide initial support for new acquisitions or modifications of weapon systems through sustainment and disposal.
The Contractor shall work with Government personnel, outside agencies, Contractor personnel, and others to support the program. Contractor personnel assist in preparation of technical material for internal and external briefings, presentations, documents and reports.
Who We Are
Oasis Systems is a premier provider of customer-driven, cost-effective and quality Engineering Services; Enterprise Systems and Applications; Human Factors Engineering; Information Technology and Cyber Security; Professional Services; and Specialized Engineering Solutions to the Department of Defense, FAA, NRC and other federal agencies.
We strive to be an exciting and welcoming company that attracts, develops, motivates and retains the most talented, skilled and dedicated people in the industry; where they are encouraged to achieve personal excellence, purpose, and their full potential and career aspirations; while supporting mission-critical national security technologies and programs.
Oasis Systems is an equal opportunity employer and does not discriminate in hiring or employment on the basis of any legally protected characteristic including, but not limited to, race, color, religion, national origin, marital status, gender, sexual orientation, ancestry, age, medical condition, military veteran status or on the basis of physical handicap which, with reasonable accommodation, render the application to satisfactorily perform the job available.