Live Chat

Boxing/Assembly Job in Eastlake, Ohio US


OhioMeansJobs | Lake County - Eastlake, OH

Posted: 1/4/2022 - Expires: 2/4/2022

Job ID: 234589439


Job Description

OhioMeansJobs Lake County is currently accepting resumes for the following position:

Eastlake, OH
Position ID Number: 38132138

Job Description: 
  1. Box labels & tank labels must be printed out for all tanks wound & on the line from your shift.
  2. Enough boxes must be made for all tanks wound & on the line from your shift.
  3. Enough boxes of bases to get the shift started. (IF A BOX HAS ONE LAYER LEFT IN IT, EMPTY THE BOX TO A FULL BOX)
  4. All 16” bases need to be flamed & taped for what is wound and on the line from your shift.
  5. All 14” bases need to be flamed for what is wound and on the line from your shift.
  6. All 16” and or 14” single boxes need to be made for what is wound and on the line from your shift.
  7. YOU ARE THE LAST STOP FOR QUALITY CONTROL BEFORE IT GOES IN THE BOX. You need to look at the tanks before putting in box.  If a tank gets to you with something cosmetic to fix (especially loose strands/fuzzy strands/any dry tank or top dome that needs sprayed/resin on inlet or in threads).  Anything that is a question about a bad tank set aside and get quality control or supervisor.
  8. Any tank that needs rerolled or encircled needs to be taken to winder on that color to be reworked. If no winders on that color, then tank gets put in a box and labeled (WINDER#/SHIFT/REASON FOR REWORK)
  9. Any tank not fixable by boxer or winder needs to be written down on scrap sheet & scrap sheet needs to be fully filled out & tank(s)need thrown out, in compactor.
  • Bases must be flamed, glued, and tank must be leveled for any tank 60” or taller.
  • Tails on all Cabinet Plug, T&B No Base, 16” tanks must be sanded and sprayed.
  • Drill for cleaning of the inlet must be used on all bottoms of T & B tanks. (EXCEPT UF’S).
  • SHIFT STICKER must be on all gaylords & single boxes.
  • All boxes when taken back to shipping must be put in proper row & stacked correctly.
  • All dome hole equipment switched over to proper size of tank that is on the line.
  • When finished cutting of dome hole, use file around the edge of the hole/glue/then put under light source for at least 1 minute.
  • Drop new skids of gaylords/unbundle/and get rid of protective cardboard & plastic strapping.
  • Restock skids/foam collars/tape/staples/tubes of black base glue/di band glue when needed.
  • Return hangers to winding department.
  • At end of shift or when done using, clean out & under dome hole cutter machine.
  • Throw away all food & candy wrappers, old gloves, cups of water & coffee from boxing table.
  • All scrap skids & cardboard needs taken out.
  • Sweep boxing area/garbage emptied and put into compactor.
Please contact Jade Peternelj (440)350-4407 or email for immediate consideration. 

Contact Information


Job Summary

Employment Type:
Full Time Employee
Job type:
Regular Employment
Skill Based Partner:
Education Level:
High school graduate
Work Days:
Sun, Mon, Tue, Wed, Thu, Fri
Work Shift:
Job Reference Code
$13.00 - $0.00 /hour
Licenses / Certifications:
Display Recommended WorkKeys®Recommended WorkKeys®: