An official State of Ohio site. Here’s how you know
Live Chat
Contact

Welcome,
New User

User: New User

Date: 11/21/2025

Cutting and Slicing Machine Setters, Operators, and Tenders

Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.

View All

    Work Activities

    Work Activities

    • Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
    • Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
    • Direct workers on cutting teams.
    • Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
    • Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
    • Cut stock manually to prepare for machine cutting, using tools such as knives, cleavers, handsaws, or hammers and chisels.
    • Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
    • Set up, operate, or tend machines that cut or slice materials, such as glass, stone, cork, rubber, tobacco, food, paper, or insulating material.
    • Select and install machine components, such as cutting blades, rollers, and templates, according to specifications, using hand tools.
    • Change or replace saw blades, cables, cutter heads, and grinding wheels, using hand tools.
    • Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
    • Monitor operation of cutting or slicing machines to detect malfunctions or to determine whether supplies need replenishment.
    • Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
    • Stack and sort cut material for packaging, further processing, or shipping, according to types and sizes of material.
    • Adjust machine controls to alter position, alignment, speed, or pressure.
    • Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
    • Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
    • Press buttons, pull levers, or depress pedals to start and operate cutting and slicing machines.
    • Start machines to verify setups, and make any necessary adjustments.
    • Remove completed materials or products from cutting or slicing machines, and stack or store them for additional processing.
    • Maintain production records, such as quantities, types, and dimensions of materials produced.
    • Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
    • Remove defective or substandard materials from machines, and readjust machine components so that products meet standards.
    • Position stock along cutting lines, or against stops on beds of scoring or cutting machines.
    • Turn cranks or press buttons to activate winches that move cars under sawing cables or saw frames.
    • Tighten pulleys or add abrasives to maintain cutting speeds.
    • Type instructions on computer keyboards, push buttons to activate computer programs, or manually set cutting guides, clamps, and knives.
    • Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
    • Mark cutting lines or identifying information on stock, using marking pencils, rulers, or scribes.
    • Position width gauge blocks between blades, and level blades and insert wedges into frames to secure blades to frames.
    • Sharpen cutting blades, knives, or saws, using files, bench grinders, or honing stones.
    • Clean and lubricate cutting machines, conveyors, blades, saws, or knives, using steam hoses, scrapers, brushes, or oil cans.
    • Review work orders, blueprints, specifications, or job samples to determine components, settings, and adjustments for cutting and slicing machines.
    • Examine, measure, and weigh materials or products to verify conformance to specifications, using measuring devices, such as rulers, micrometers, or scales.
    • Start machines to verify setups, and make any necessary adjustments.
    • Feed stock into cutting machines, onto conveyors, or under cutting blades, by threading, guiding, pushing, or turning handwheels.
    • Move stock or scrap to and from machines manually, or by using carts, handtrucks, or lift trucks.

    Skills

    • Writing

      Writing things for co-workers or customers.

    • Speaking

      Talking to others.

    • Installation

      Installing equipment, machines, wiring, or computer programs.

    • Repairing

      Repairing machines or systems using the right tools.

    • Mathematics

      Using math to solve problems.

    • Negotiation

      Bringing people together to solve differences.

    • Instructing

      Teaching people how to do something.

    • Service Orientation

      Looking for ways to help people.

    • Equipment Selection

      Deciding what kind of tools and equipment are needed to do a job.

    • Active Learning

      Figuring out how to use new ideas or things.

    • Troubleshooting

      Figuring out what is causing equipment, machines, wiring, or computer programs to not work.

    • Judgment and Decision Making

      Thinking about the pros and cons of different options and picking the best one.

    • Technology Design

      Making equipment and technology useful for customers.

    • Active Listening

      Listening to others, not interrupting, and asking good questions.

    • Coordination

      Changing what is done based on other people's actions.

    • Complex Problem Solving

      Noticing a problem and figuring out the best way to solve it.

    • Operations Analysis

      Figuring out what a product or service needs to be able to do.

    • Persuasion

      Talking people into changing their minds or their behavior.

    • Social Perceptiveness

      Understanding people's reactions.

    • Systems Analysis

      Figuring out how a system should work and how changes in the future will affect it.

    • Operation and Control

      Using equipment or systems.

    • Systems Evaluation

      Measuring how well a system is working and how to improve it.

    • Monitoring

      Keeping track of how well people and/or groups are doing in order to make improvements.

    • Equipment Maintenance

      Planning and doing the basic maintenance on equipment.

    • Programming

      Writing computer programs.

    • Reading Comprehension

      Reading work-related information.

    • Science

      Using scientific rules and strategies to solve problems.

    • Critical Thinking

      Thinking about the pros and cons of different ways to solve a problem.

    • Operations Monitoring

      Watching gauges, dials, or display screens to make sure a machine is working.

    • Time Management

      Managing your time and the time of other people.

    • Management of Material Resources

      Managing equipment and materials.

    • Learning Strategies

      Using the best training or teaching strategies for learning new things.

    • Quality Control Analysis

      Testing how well a product or service works.

    • Management of Personnel Resources

      Selecting and managing the best workers for a job.

    • Management of Financial Resources

      Making spending decisions and keeping track of what is spent.

    WorkKeys®

    Applied Math
    4
    Workplace Documents
    4
    Graphic Literacy
    4

    Abilities

    • Memorization

      Remembering words, numbers, pictures, or steps.

    • Written Expression

      Communicating by writing.

    • Perceptual Speed

      Quickly comparing groups of letters, numbers, pictures, or other things.

    • Speed of Limb Movement

      Quickly moving your arms and legs.

    • Depth Perception

      Deciding which thing is closer or farther away from you, or deciding how far away it is from you.

    • Static Strength

      Lifting, pushing, pulling, or carrying.

    • Rate Control

      Changing when and how fast you move based on how something else is moving.

    • Visual Color Discrimination

      Noticing the difference between colors, including shades and brightness.

    • Hearing Sensitivity

      Telling the difference between sounds.

    • Oral Comprehension

      Listening and understanding what people say.

    • Number Facility

      Adding, subtracting, multiplying, or dividing.

    • Category Flexibility

      Grouping things in different ways.

    • Visualization

      Imagining how something will look after it is moved around or changed.

    • Arm-Hand Steadiness

      Keeping your arm or hand steady.

    • Near Vision

      Seeing details up close.

    • Sound Localization

      Noticing the direction that a sound came from.

    • Stamina

      Exercising for a long time without getting out of breath.

    • Speech Recognition

      Recognizing spoken words.

    • Oral Expression

      Communicating by speaking.

    • Inductive Reasoning

      Making general rules or coming up with answers from lots of detailed information.

    • Flexibility of Closure

      Seeing hidden patterns.

    • Wrist-Finger Speed

      Making fast, simple, repeated movements of your fingers, hands, and wrists.

    • Response Orientation

      Quickly deciding if you should move your hand, foot, or other body part.

    • Far Vision

      Seeing details that are far away.

    • Reaction Time

      Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.

    • Spatial Orientation

      Knowing where things are around you.

    • Control Precision

      Quickly changing the controls of a machine, car, truck or boat.

    • Explosive Strength

      Jumping, sprinting, or throwing something.

    • Auditory Attention

      Paying attention to one sound while there are other distracting sounds.

    • Problem Sensitivity

      Noticing when problems happen.

    • Written Comprehension

      Reading and understanding what is written.

    • Deductive Reasoning

      Using rules to solve problems.

    • Originality

      Creating new and original ideas.

    • Mathematical Reasoning

      Choosing the right type of math to solve a problem.

    • Time Sharing

      Doing two or more things at the same time.

    • Fluency of Ideas

      Coming up with lots of ideas.

    • Selective Attention

      Paying attention to something without being distracted.

    • Manual Dexterity

      Holding or moving items with your hands.

    • Finger Dexterity

      Putting together small parts with your fingers.

    • Multilimb Coordination

      Using your arms and/or legs together while sitting, standing, or lying down.

    • Gross Body Coordination

      Moving your arms, legs, and mid-section together while your whole body is moving.

    • Glare Sensitivity

      Seeing something even if there is a glare or very bright light.

    • Night Vision

      Seeing at night or under low light.

    • Speech Clarity

      Speaking clearly.

    • Speed of Closure

      Quickly knowing what you are looking at.

    • Information Ordering

      Ordering or arranging things.

    • Extent Flexibility

      Bending, stretching, twisting, or reaching with your body, arms, and/or legs.

    • Peripheral Vision

      Seeing something to your side when your are looking ahead.

    • Dynamic Flexibility

      Quickly and repeatedly bending, stretching, twisting, or reaching out with your body, arms, and/or legs.

    • Dynamic Strength

      Exercising for a long time without your muscles getting tired.

    • Trunk Strength

      Using your lower back and stomach.

    • Gross Body Equilibrium

      Keeping your balance or staying upright.

    Knowledge

    • Geography

      Knowledge of principles and methods for describing the features of land, sea, and air masses, including their physical characteristics, locations, interrelationships, and distribution of plant, animal, and human life.

    • History and Archeology

      Knowledge of historical events and their causes, indicators, and effects on civilizations and cultures.

    • Transportation

      Knowledge of principles and methods for moving people or goods by air, rail, sea, or road, including the relative costs and benefits.

    • Public Safety and Security

      Knowledge of relevant equipment, policies, procedures, and strategies to promote effective local, state, or national security operations for the protection of people, data, property, and institutions.

    • Computers and Electronics

      Knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including applications and programming.

    • Physics

      Knowledge and prediction of physical principles, laws, their interrelationships, and applications to understanding fluid, material, and atmospheric dynamics, and mechanical, electrical, atomic and sub-atomic structures and processes.

    • Customer and Personal Service

      Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction.

    • Production and Processing

      Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods.

    • Therapy and Counseling

      Knowledge of principles, methods, and procedures for diagnosis, treatment, and rehabilitation of physical and mental dysfunctions, and for career counseling and guidance.

    • Fine Arts

      Knowledge of the theory and techniques required to compose, produce, and perform works of music, dance, visual arts, drama, and sculpture.

    • Philosophy and Theology

      Knowledge of different philosophical systems and religions. This includes their basic principles, values, ethics, ways of thinking, customs, practices, and their impact on human culture.

    • Building and Construction

      Knowledge of materials, methods, and the tools involved in the construction or repair of houses, buildings, or other structures such as highways and roads.

    • English Language

      Knowledge of the structure and content of the English language including the meaning and spelling of words, and rules of composition and grammar.

    • Telecommunications

      Knowledge of transmission, broadcasting, switching, control, and operation of telecommunications systems.

    • Mathematics

      Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.

    • Administration and Management

      Knowledge of business and management principles involved in strategic planning, resource allocation, human resources modeling, leadership technique, production methods, and coordination of people and resources.

    • Economics and Accounting

      Knowledge of economic and accounting principles and practices, the financial markets, banking, and the analysis and reporting of financial data.

    • Personnel and Human Resources

      Knowledge of principles and procedures for personnel recruitment, selection, training, compensation and benefits, labor relations and negotiation, and personnel information systems.

    • Psychology

      Knowledge of human behavior and performance; individual differences in ability, personality, and interests; learning and motivation; psychological research methods; and the assessment and treatment of behavioral and affective disorders.

    • Medicine and Dentistry

      Knowledge of the information and techniques needed to diagnose and treat human injuries, diseases, and deformities. This includes symptoms, treatment alternatives, drug properties and interactions, and preventive health-care measures.

    • Communications and Media

      Knowledge of media production, communication, and dissemination techniques and methods. This includes alternative ways to inform and entertain via written, oral, and visual media.

    • Food Production

      Knowledge of techniques and equipment for planting, growing, and harvesting food products (both plant and animal) for consumption, including storage/handling techniques.

    • Education and Training

      Knowledge of principles and methods for curriculum and training design, teaching and instruction for individuals and groups, and the measurement of training effects.

    • Foreign Language

      Knowledge of the structure and content of a foreign (non-English) language including the meaning and spelling of words, rules of composition and grammar, and pronunciation.

    • Administrative

      Knowledge of administrative and office procedures and systems such as word processing, managing files and records, stenography and transcription, designing forms, and workplace terminology.

    • Engineering and Technology

      Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to the design and production of various goods and services.

    • Chemistry

      Knowledge of the chemical composition, structure, and properties of substances and of the chemical processes and transformations that they undergo. This includes uses of chemicals and their interactions, danger signs, production techniques, and disposal methods.

    • Design

      Knowledge of design techniques, tools, and principles involved in production of precision technical plans, blueprints, drawings, and models.

    • Biology

      Knowledge of plant and animal organisms, their tissues, cells, functions, interdependencies, and interactions with each other and the environment.

    • Sociology and Anthropology

      Knowledge of group behavior and dynamics, societal trends and influences, human migrations, ethnicity, cultures, and their history and origins.

    • Sales and Marketing

      Knowledge of principles and methods for showing, promoting, and selling products or services. This includes marketing strategy and tactics, product demonstration, sales techniques, and sales control systems.

    • Mechanical

      Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

    • Law and Government

      Knowledge of laws, legal codes, court procedures, precedents, government regulations, executive orders, agency rules, and the democratic political process.

    Career Video

    Video not available
    Additional videos and more information available on CareerOneStop

    Pay

    • Ohio Annual Salary 45280/yr
    • Typical Salary
    • Ohio Hourly Wage 21.77/hr
    • Typical Hourly Wage

    Ohio Employment Trends

    • Currently Employed 3,020
    • Yearly Projected Openings 320

    Typical Education

    Personality

    Realistic: People interested in this work like activities that include practical, hands-on problems and solutions.They do well at jobs that need:
    • Dependability
    • Attention to Detail
    • Self Control
    • Adaptability/Flexibility
    • Cooperation
    • Initiative

    Tools

    • Automatic lathe or chucking machine
    • Belt conveyors
    • Bench grinder
    • Bench scales
    • Boring machines
    • Calipers
    • Carts
    • Cleaning brushes
    • Cleaning scrapers
    • Cold chisels
    • Commercial use food slicers
    • Drill press or radial drill
    • Forklifts
    • Hammers
    • Hand trucks or accessories
    • Hydraulic shears
    • Jib crane
    • Laser cutting machine
    • Metal shearing machine
    • Micrometers
    • Milling machines
    • Oil can
    • Oil gun
    • Pallet trucks
    • Paper cutting machines or accessories
    • Personal computers
    • Plasma cutting machine
    • Power saws
    • Precision file
    • Rulers
    • Saws
    • Screwdrivers
    • Scribers
    • Sharpening stones or tools or kits
    • Special hoses
    • Squares
    • Tape measures
    • Track cranes
    • Trim press
    • Utility knives

    Technology

    • Electronic mail software
    • Enterprise resource planning ERP software
    • Spreadsheet software
    • Word processing software

    Tags

    • Apprenticeships are available for this occupation. These programs can help you get hands-on experience and build your skills.

    Budget Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Lifestyle Calculator

    Answer a few questions to determine your target salary. Use this target salary to help choose the right occupation for you.

    Workforce Supply Tool

    Workforce Supply Tool

    The Workforce Supply Tool provides statistics for the occupations in highest demand throughout Ohio.

    You can view statewide statistics as well as more region specific information.

    Visit Site
    Powered By: